Hong Kong JYJC International Trade Limited
High quality products and competitive prices are the company's development standards.
Add to Cart
Medical And Home Use Blood Glucose Meter With OLED Display
Product specifications:
1. Shows parameters are: blood oxygen saturation value, pulse frequency, pulse column
2. OLED color display
3. AAA *2 batteries
4. Low voltage indicator
5. Automatic switch machine function
6. Four direction adjustable
7. two colour OLED display,more display modes
8. Two parameters:SPO2,pulse reate
9. SPO2 measurement range:70%-99%
10. colour :Blue, Pink, Green, Gray, Purple
Packaging:
Dimension(L×W×H)
57mm×31mm×31mm
Net Weight:55g
Color box Dimension(L×W×H)
80mm×60mm×38mm
Carton Box Dimension(L×W×H)
430mm×340mm×200mm
Gross Weight(100pcs):5.4Kg( no include batteries)
| Problems | Possible causes | Solutions |
| Blood oxygen or heart rate doesn't show properly | 1. Fingers are not properly placed ;2. The patient's blood oxygen value is very low and can not be detected. | 1. Please put your finger in correctly and try again 2. Please try a few more times. If you confirm that this product has no quality problems, please go to the hospital to confirm it. |
| Blood oxygen or heart rate shows instability | 1. Fingers are not deep enough. 2. The fingers shake or the body moves. | 1. Please put your fingers in correctly and try again ;2 Please try to keep your body still.
|
| Unable to boot
| 1. The battery may be undercharged or not ;2. The battery may not be properly installed ;3. The machine may be damaged. | 1. Please change the battery ;2. Please re-install the battery ;3. Please contact the local customer service center.
|
| The light suddenly went off
| 1. When there is no detection signal, this product is set as automatically shut down after 8 seconds ;2 . The battery is insufficient.
| 1. normal ;2. Please replace the battery.
|
| Screen display "Error3" or" Error4"
| 1. The battery voltage is too low ;2, receiver or wiring is damaged ;3, receiver installation error ;4, amp circuit failure.
| 1. Please change the battery ;2. Please contact the local customer service center ;3. Please contact the local customer service center ;4. Please contact the local customer service center.
|